Difference between 3 parts syringe with needle with CE and ISO13485 and the two-piece syringe
 2023/01/30 | View:607

What is the difference between a 3 parts syringe with needle with CE and ISO13485 and a two-piece syringe? Before we delve into the main differences between these two types of syringes, we need to understand the two most widely used disposable syringes on the market.

 

3 parts syringe with needle with CE and ISO13485


What is a 3 parts syringe with needle with CE and ISO13485?

The 3 parts syringe with the needle with CE and ISO13485 consists mainly of a jacket, a piston, a mandrel, and an optional needle. 3 parts syringe with needle with CE and ISO13485 is very popular for its low cost, smooth gliding motion, and wide range of functions it offers. The construction consists of a rubber washer located at the tip of the plunger inside the barrel.

 

The rubber washer acts as a sealant and creates a vacuum when the plunger is pulled down or up. A small warning about this is that the rubber tends to stick a little when rubbed against solid surfaces (e.g. the plastic barrel of a syringe). For this reason, 3 parts syringe with needle with CE and ISO13485 use lubricants (e.g. silicone oil) to prevent sticking and to achieve a smooth downward and upward movement. For many applications, the lubricant will not affect the desired result and the syringe will work as intended.

 

However, for some medical, laboratory and production applications, lubricants can sometimes act as contaminants and produce problematic results. But this is where the two-piece syringe comes in handy.

 

2-Part Syringes


What is a two-piece syringe?

A two-piece syringe does not use a rubber tip on the plunger to create a vacuum seal. Instead, it uses a precision-designed, slightly oversized plunger tip that expands the barrel and creates a vacuum as it draws downwards.

 

The two-piece syringes are made from a polypropylene barrel and polyethylene plunger and require no lubricant to work. They are ideal for applications where foreign substances (such as silicone oil) are unlikely to interfere with the desired results.

 

This is the difference between a 3 parts syringe with needle with CE and ISO13485 and a two-piece syringe. We hope you find this helpful and if you have any further questions or requirements on this subject, you can contact us directly.


Get In Touch

Quick Response within 24 hours!

name*
email*
tel
mess*

Contact Us

  • 电话Tel: (+)86-519-88168398

  • whatsappWhatsApp: +86-13961432323

  • 邮箱Email: sale01@lelun.com

  • 地图HengShanQiao Town, out of East Gate, Changzhou ,Jiangsu, China

About Us

Changzhou Medical Appliances General Factory Co., Ltd. was built in 1988, it is a modern factory specialized in producing the disposable medical appliances in China. The factory is only 1km to Hengshan entrance of Huning high-speed road and is about 20 miles to Changzhou airport. So the traffic is convenience.
The area of the factory is 40000㎡, the area of purifying workshop is 7000m, and fixed assets are about 5,000,000USD. Our main products are Disposable infusion sets, Disposable blood transfusion sets, Disposable Sterile syringe sets, latex glove, disposable infusion set, simple oxygen mask, nebulizer mask, urine cup, hernia mesh, urine bag etc. Now we can manufacture more than 200,000,000 sets per year.

CopyRight © 2023-2024   Changzhou Medical Appliances General Factory Co.,Ltd  All rights reserved   Sitemap   All tags   Designed by Zhonghuan Internet
Get The Latest Product Information
From the beginning, we puts customer service first around the world, the most professional processor and supporters you can trust. This is our comprehensive commitment to quality.
Company Name
*
This field is required
Email
*
This field is required
Email format error
Phone
This field is required
Telephone information is wrong!
Message
*
This field is required
Send Message